Penerapan Metode MOORA dan LOPCOW Dalam Seleksi Penerimaan Guru Bimbel

Ari Sulistiyawati

doi:10.58602/jaiti.v2i4.139

Ari Sulistiyawati Universitas Teknokrat Indonesia

DOI: https://doi.org/10.58602/jaiti.v2i4.139

Keywords: Tutor, Combination, LOPCOW, MOORA, Selection

Abstract

The selection of the right tutor admission is important to ensure that each teacher has strong pedagogical competence, communication skills, and material understanding, as well as the ability to manage the classroom and motivate students. However, the selection of ideal teachers based on these criteria is often a challenge due to the limitations of objective and transparent assessment methods. The combination of MOORA and LOPCOW in multi-criteria decision-making offers a robust and objective approach to ranking alternatives based on relevant criteria. The combination of these two methods is expected to be able to provide more accurate, efficient, and in accordance with the needs of tutoring institutions in recruiting qualified teachers. This research aims to provide a comprehensive solution in the selection process, but also contributes to the development of a selection method based on multi-criteria analysis in the context of education. The ranking results show an alternative ranking for tutoring teacher admissions based on the scores obtained by each prospective teacher. From these results, Yusuf Hakim is ranked first with the highest score of 0.3715, which shows that he is the strongest candidate to be accepted. The second place was occupied by Siti Zahra with a score of 0.3635, followed by Intan Permata who had a score of 0.3622 in third place. From this data, it can be concluded that Yusuf Hakim is the most recommended candidate to be accepted as a tutor, while Fajar Pratama has the lowest score in this assessment.

Downloads

Download data is not yet available.

References

T. Barik, S. Parida, and K. Pal, “Optimizing the input parameters setting for least hole defects while drilling CFRP laminates by multi-objective optimization on the basis of ratio analysis (MOORA) method,” J. Phys. Conf. Ser., vol. 2484, no. 1, p. 012007, May 2023, doi: 10.1088/1742-6596/2484/1/012007.

D. A. Megawaty, D. Damayanti, A. Widiyanti, and S. Setiawansyah, “Combination of Multi-Objective Optimization on The Basis of Ratio Analysis and ROC in The Selection of Extracurricular Activities,” J. INFOTEL, vol. 16, no. 2, pp. 398–412, 2024, doi: 10.20895/infotel.v16i2.1108.

G. M. Magableh, “An integrated model for rice supplier selection strategies and a comparative analysis of fuzzy multicriteria decision-making approaches based on the fuzzy entropy weight method for evaluating rice suppliers,” PLoS One, vol. 19, no. 4, p. e0301930, Apr. 2024, doi: 10.1371/journal.pone.0301930.

S. Sintaro and S. Setiawansyah, “Kombinasi Multi-Objective Optimization on the basis of Ratio Analysis (MOORA) dan PIPRECIA dalam Seleksi Penerimaan Barista,” J. Ilm. Inform. dan Ilmu Komput., vol. 3, no. 1, pp. 13–23, 2024, doi: 10.58602/jima-ilkom.v3i1.23.

T. Van Dua, D. Van Duc, N. C. Bao, and D. D. Trung, “Integration of objective weighting methods for criteria and MCDM methods: application in material selection,” EUREKA Phys. Eng., no. 2, pp. 131–148, Mar. 2024, doi: 10.21303/2461-4262.2024.003171.

A. Ulutaş, A. Topal, Ö. F. Görçün, and F. Ecer, “Evaluation of third-party logistics service providers for car manufacturing firms using a novel integrated grey LOPCOW-PSI-MACONT model,” Expert Syst. Appl., vol. 241, p. 122680, May 2024, doi: 10.1016/j.eswa.2023.122680.

F. Ecer and D. Pamucar, “A novel LOPCOW‐DOBI multi‐criteria sustainability performance assessment methodology: An application in developing country banking sector,” Omega, vol. 112, p. 102690, Oct. 2022, doi: 10.1016/j.omega.2022.102690.

S. Korucuk, A. Aytekin, Ö. Görçün, V. Simic, and Ö. Faruk Görçün, “Warehouse site selection for humanitarian relief organizations using an interval-valued fermatean fuzzy LOPCOW-RAFSI model,” Comput. Ind. Eng., vol. 192, p. 110160, Jun. 2024, doi: 10.1016/j.cie.2024.110160.

A. A. Izka and H. Sulistiani, “Penerapan Metode Pembobotan LOPCOW dan Grey Relational Analysis Dalam Penentuan Pemasok Toserba Terbaik,” J. Inf. Syst. Res., vol. 5, no. 4, pp. 1352–1360, 2024, doi: 10.47065/josh.v5i4.5537.

A. F. Pasaribu, A. Surahman, A. T. Priandika, S. Sintaro, and Y. T. Utami, “Sistem Pendukung Keputusan Seleksi Penerimaan Guru Menggunakan SAW,” J. Artif. Intell. Technol. Inf., vol. 1, no. 1, pp. 13–19, Feb. 2023, doi: 10.58602/jaiti.v1i1.21.

S. Rahayu and A. Sindar, “Sistem Pendukung Keputusan Penilaian Kinerja Guru Menggunakan Metode Simple Additive Weighting,” J. Ilmu Komput. dan Inform., vol. 2, no. 2, pp. 103–112, 2022.

Y. I. Mere, “Sistem Pendukung Keputusan Penentuan Calon Guru Honorer Di SMP Negeri 3 Kota Tambolaka Dengan Metode TOPSIS,” J. Ilm. Teknol. Inf. Asia, vol. 18, no. 1, pp. 48–59, 2024.

M. Muliana, S. Saikin, and S. Fadli, “SISTEM PENDUKUNG KEPUTUSAN EVALUASI KINERJA GURU MENGGUNAKAN METODE HYBRID RANK ORDER CENTROID DAN SIMPLE ADDITIVE WEIGHTING,” J. Rev. Pendidik. dan Pengajaran, vol. 7, no. 4, pp. 13393–13401, 2024.

H. Sulistiani, Setiawansyah, P. Palupiningsih, F. Hamidy, P. L. Sari, and Y. Khairunnisa, “Employee Performance Evaluation Using Multi-Attribute Utility Theory (MAUT) with PIPRECIA-S Weighting: A Case Study in Education Institution,” in 2023 International Conference on Informatics, Multimedia, Cyber and Informations System (ICIMCIS), 2023, pp. 369–373. doi: 10.1109/ICIMCIS60089.2023.10349017.

Setiawansyah, A. A. Aldino, P. Palupiningsih, G. F. Laxmi, E. D. Mega, and I. Septiana, “Determining Best Graduates Using TOPSIS with Surrogate Weighting Procedures Approach,” in 2023 International Conference on Networking, Electrical Engineering, Computer Science, and Technology (IConNECT), 2023, pp. 60–64. doi: 10.1109/IConNECT56593.2023.10327119.

S. Setiawansyah, S. H. Hadad, A. A. Aldino, P. Palupiningsih, G. Fitri Laxmi, and D. A. Megawaty, “Employing PIPRECIA-S weighting with MABAC: a strategy for identifying organizational leadership elections,” Bull. Electr. Eng. Informatics, vol. 13, no. 6, pp. 4273–4284, Dec. 2024, doi: 10.11591/eei.v13i6.7713.

H. Sulistiani, S. Setiawansyah, A. F. O. Pasaribu, P. Palupiningsih, K. Anwar, and V. H. Saputra, “New TOPSIS: Modification of the TOPSIS Method for Objective Determination of Weighting,” Int. J. Intell. Eng. Syst., vol. 17, no. 5, pp. 991–1003, Oct. 2024, doi: 10.22266/ijies2024.1031.74.

J. Wang, S. Setiawansyah, and Y. Rahmanto, “Decision Support System for Choosing the Best Shipping Service for E-Commerce Using the SAW and CRITIC Methods,” J. Ilm. Inform. dan Ilmu Komput., vol. 3, no. 2, pp. 101–109, 2024, doi: 10.58602/jima-ilkom.v3i2.32.